Hertz
Hertz S8 DSP
픽업 사용 가능 여부를 로드할 수 없습니다.
Efficient Lighting Supply is proud to offer the ultra-compact Hertz S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
Hertz S8 DSP processes the audio signal with 96 kHz / 24-bit resolution and has obtained the Hi-Res certification from the JAS (Japan Audio Society), an acknowledgment that certifies the extreme level of audio performance achieved.
The powerful 32-bit DSP manages 6 high/low-level analog input channels, one digital coaxial input, and 8 output channels, offering maximum freedom of configuration to the specialist. The SPDIF coaxial input is ideal for digital connection with a Hi-Res player, a solution that allows for maximum listening quality. For each of the eight output channels we have a level control, the 15-pole parametric equalizer, time delays, and crossover filter available. The 7-band parametric equalizer of the input signal allows obtaining a flat response from OEM sources, which often have an exaggerated emphasis on the low frequency.
POWER SUPPLY | |
---|---|
Nominal Power supply voltage / fuse: | 7 ÷ 20 VDC / 1A |
Pulse operating voltage: | 5 ÷ 24 VDC |
Idling current: | 0.34 A |
OFF current (ART= OFF): | <80 uA |
OFF current (ART= ON): | <80 uA |
Remote IN | 6 ÷ 20 VDC (10 mA) |
Remote OUT | 4 ÷ 20 VDC (150 mA) |
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): | 1.5 ÷ 7 VDC |
Analog low level Inputs | 6 ch. (Differential input) (Molex microfit to RCAs) |
Analog high level Inputs | 6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator) |
Digital inputs | Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA) |
Input sensitivity (low level) | 0.8V – 6V RMS |
Input sensitivity (high level) | 2.5V – 21V RMS |
Analog inputs management | Audio input routing matrix type |
Analog inputs eq | 7 bands paragraphic for each input channel |
ART | Automatic Remote Turn-On/Off with Speaker-In |
Analog outputs (rca) | 8 channels |
Max output level (rms) @ 0.05% THD | 4V |
Analog outputs management | The DSP controls each output channel: gain, crossover, EQ, delay, polarity |
Bandwidth | 10Hz – 40KHz (+/-3db) |
Signal to noise ratio (A weighted) | 105dBA (Analog Input) 112dBA (Digital Input) |
THD+N (@ 1Vrms out, @ 1Khz) | <0.005% |
Crosstalk (channel separation) @ 1KHz | >95dBA |
Sample rate | 96KHz |
Bit depth | 24 |
Output equalizer | 15 bands per channel w/ adjustable Q and Frequency |
Equalizer resolution | 1/10th dB per step +12dB / -12dB |
Time alignment (distance) | 0 ÷ 468.4 cm / 0 ÷ 184.4 inches |
Time alignment (time) | 0 ÷ 13.5ms |
Time alignment (step) | 0,08 ms; 2,8 cm / 1.1 inch |
Time alignment (fine set) | 0,02 ms; 0,7 cm / 0.27 inch |
Crossovers | AP/HP/LP/BP all channels |
Crossover type | Butterworth, Linkwitz-Riley, Bessel (All Channels) |
Crossover slope | From 6dB/oct. until 30dB/oct. (6dB step) |
Crossover steps | 120 steps 20Hz-20KHz |
Mute function | Each channel individually, or all channels. |
Presets | 4 presets |
Presets selection | 2 specific wires to control the 4 presets selection by extarnal switches. |
Input selection by wire | One specific wire to select the desired input between Analog or Digital. |
Audio signal compressor on output stage | Yes (enable/disable) |
DSP chipset | Analog Device: ADAU1451 |
DSP management by bt app (iOS/ Android) | 1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file. |
Setup file sharing via bt | Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode. |
DSP management by pc / mac / ios / android | Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE) |
Shipping & Returns
Shipping & Returns
Shipping: Standard transit time for most shipments is 1-5 business days once shipped, depending on location of warehouse we ship your order from.
Returns: item must be in BRAND NEW never powered up or turned on or mounted condition. No components missing (i.e. original packaging, screws, bass knobs, plastic coverings, protective films, serial numbers, tags, stickers, and other manufacturer labels removed or tampered with etc.) Failure to meet any of these requirements will result in denial of return refund. Any product returned for any reason must be returned in its original and serial number matching box. Shipping & handling charges are non-refundable. All refunds will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS or USPS Rate deducted from their refund.
Dimensions
Dimensions
![Hertz S8 DSP](http://www.efficientlightingsupply.com/cdn/shop/files/Hertz-S8-DSp_1445x.jpg?v=1710267500)
![Hertz S8 DSP](http://www.efficientlightingsupply.com/cdn/shop/files/Hertz_S8_PACKAGING-CONTENTS_web_1445x.jpg?v=1710267500)
![Hertz S8 DSP](http://www.efficientlightingsupply.com/cdn/shop/files/Hertz-S8-DSP_PANEL_1445x.jpg?v=1710267500)
![Hertz S8 DSP](http://www.efficientlightingsupply.com/cdn/shop/files/Hertz_H8-DSP_dimensions_1445x.png?v=1710267498)