Hertz S8 DSP
Efficient Lighting Supply is proud to offer the ultra-compact Hertz S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
Hertz S8 DSP processes the audio signal with 96 kHz / 24-bit resolution and has obtained the Hi-Res certification from the JAS (Japan Audio Society), an acknowledgment that certifies the extreme level of audio performance achieved.
The powerful 32-bit DSP manages 6 high/low-level analog input channels, one digital coaxial input, and 8 output channels, offering maximum freedom of configuration to the specialist. The SPDIF coaxial input is ideal for digital connection with a Hi-Res player, a solution that allows for maximum listening quality. For each of the eight output channels we have a level control, the 15-pole parametric equalizer, time delays, and crossover filter available. The 7-band parametric equalizer of the input signal allows obtaining a flat response from OEM sources, which often have an exaggerated emphasis on the low frequency.
POWER SUPPLY | |
---|---|
Nominal Power supply voltage / fuse: | 7 ÷ 20 VDC / 1A |
Pulse operating voltage: | 5 ÷ 24 VDC |
Idling current: | 0.34 A |
OFF current (ART= OFF): | <80 uA |
OFF current (ART= ON): | <80 uA |
Remote IN | 6 ÷ 20 VDC (10 mA) |
Remote OUT | 4 ÷ 20 VDC (150 mA) |
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): | 1.5 ÷ 7 VDC |
Analog low level Inputs | 6 ch. (Differential input) (Molex microfit to RCAs) |
Analog high level Inputs | 6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator) |
Digital inputs | Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA) |
Input sensitivity (low level) | 0.8V – 6V RMS |
Input sensitivity (high level) | 2.5V – 21V RMS |
Analog inputs management | Audio input routing matrix type |
Analog inputs eq | 7 bands paragraphic for each input channel |
ART | Automatic Remote Turn-On/Off with Speaker-In |
Analog outputs (rca) | 8 channels |
Max output level (rms) @ 0.05% THD | 4V |
Analog outputs management | The DSP controls each output channel: gain, crossover, EQ, delay, polarity |
Bandwidth | 10Hz – 40KHz (+/-3db) |
Signal to noise ratio (A weighted) | 105dBA (Analog Input) 112dBA (Digital Input) |
THD+N (@ 1Vrms out, @ 1Khz) | <0.005% |
Crosstalk (channel separation) @ 1KHz | >95dBA |
Sample rate | 96KHz |
Bit depth | 24 |
Output equalizer | 15 bands per channel w/ adjustable Q and Frequency |
Equalizer resolution | 1/10th dB per step +12dB / -12dB |
Time alignment (distance) | 0 ÷ 468.4 cm / 0 ÷ 184.4 inches |
Time alignment (time) | 0 ÷ 13.5ms |
Time alignment (step) | 0,08 ms; 2,8 cm / 1.1 inch |
Time alignment (fine set) | 0,02 ms; 0,7 cm / 0.27 inch |
Crossovers | AP/HP/LP/BP all channels |
Crossover type | Butterworth, Linkwitz-Riley, Bessel (All Channels) |
Crossover slope | From 6dB/oct. until 30dB/oct. (6dB step) |
Crossover steps | 120 steps 20Hz-20KHz |
Mute function | Each channel individually, or all channels. |
Presets | 4 presets |
Presets selection | 2 specific wires to control the 4 presets selection by extarnal switches. |
Input selection by wire | One specific wire to select the desired input between Analog or Digital. |
Audio signal compressor on output stage | Yes (enable/disable) |
DSP chipset | Analog Device: ADAU1451 |
DSP management by bt app (iOS/ Android) | 1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file. |
Setup file sharing via bt | Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode. |
DSP management by pc / mac / ios / android | Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE) |
शिपिंग और वापसी
शिपिंग और वापसी
शिपिंग: अधिकांश शिपमेंट के लिए मानक पारगमन समय 1-5 व्यावसायिक दिनों का होता है, एक बार शिप करने के बाद, हम आपके ऑर्डर को वेयरहाउस के स्थान पर निर्भर करते हैं।
रिटर्न: आइटम बिल्कुल नया होना चाहिए कभी भी संचालित या चालू या माउंटेड स्थिति में नहीं होना चाहिए। कोई घटक गायब नहीं है (यानी मूल पैकेजिंग, स्क्रू, बास नॉब्स, प्लास्टिक कवरिंग, सुरक्षात्मक फिल्में, सीरियल नंबर, टैग, स्टिकर, और अन्य निर्माता लेबल हटाए गए या छेड़छाड़ किए गए आदि) इनमें से किसी भी आवश्यकता को पूरा करने में विफलता के परिणामस्वरूप वापसी से इनकार किया जाएगा धनवापसी। किसी भी कारण से लौटाए गए किसी भी उत्पाद को उसके मूल और क्रमांक मिलान बॉक्स में वापस किया जाना चाहिए। शिपिंग और हैंडलिंग शुल्क गैर-वापसी योग्य हैं। सभी रिफंड की गणना यूनिट लागत के आधार पर की जाएगी। "मुफ़्त शिपिंग" के साथ खरीदे गए उत्पादों की UPS या USPS दर उनकी धनवापसी से काट ली जाएगी।